Uninstalling Businessobjects Enterprise - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT - UPGRADE GUIDE 10.3 30-03-2010 Upgrade Manual

To continue to create and generate ZENworks Reports, perform the following tasks in the order
listed:
1. Uninstall the BusinessObjects Enterprise Server that is installed on the ZENworks 10
Configuration Management Primary Server. For more information, see
"Uninstalling BusinessObjects Enterprise," on page
2. Install ZENworks Reporting Server. For more information, see
ZENworks Reporting Server," on page

2.1.1 Uninstalling BusinessObjects Enterprise

1 Upgrade the ZENworks 10 Configuration Management Primary Server to Update for
ZENworks Configuration Management (10.1.1). For more information, see
ZENworks System
Administration
2 Uninstall the BusinessObjects Enterprise Server from the Primary Server:
On Windows: Do the following:
On Linux: Do the following:
16 ZENworks 10 Configuration Management Upgrade Guide
Updates" in the
Reference.
1. Log in as an administrator.
2. On the desktop, click Start > Settings > Control Panel.
3. Double-click Add or Remove Programs and uninstall BusinessObjects Enterprise
Server.
4. At the command prompt, go to the
directory.
5. Run the
pmrboecleanup.bat
(Conditional) Do not run the
bundled with Update for ZENworks Configuration Management (10.1.1) on the
Primary Server that has the Reporting Server installed. If you run the file, the
Reporting Server is removed from the Primary Server. To resolve this issue, upgrade
to Update for ZENworks Configuration Management (10.1.2). The Reporting Server
is not removed from the Primary Server when you subsequently run the
pmrboecleanup.bat
6. To view the log information, go to
%ZENWORKS_HOME%\logs\pmrboepostuninstall.log
1. Log in as .
root
2. Stop the BusinessObjects Enterprise services by running the following command:
/etc/init.d/BobjEnterprise115 stop
3. Uninstall the BusinessObjects Enterprise Server by running the following command:
/opt/novell/zenworks/share/boe/bobje/uninstallBOBJE.sh
4. Navigate to the
/opt/novell/zenworks/share/pmrboecleanup
5. Run the
pmrboecleanup.sh
(Conditional) Do not run the
bundled with Update for ZENworks Configuration Management (10.1.1) on the
Primary Server that has the Reporting Server installed. If you run the file, the
Reporting Server is removed from the Primary Server. To resolve this issue, upgrade
16.
17.
ZENworks 10 Configuration Management System
%ZENWORKS_HOME%\share\pmrboecleanup
file.
pmrboecleanup.bat
or file.
pmrboecleanup.sh
script file.
pmrboecleanup.bat
Section 2.1.1,
Section 2.1.2, "Installing
"Introduction to
or file
pmrboecleanup.sh
.
directory.
or file
pmrboecleanup.sh