Reinstalling The Novell File Upload Extension; Uploading Waik; Installing Zenworks Reporting Server - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT - UPGRADE GUIDE 10.3 30-03-2010 Upgrade Manual

Section 3.3.3, "Installing ZENworks Reporting Server," on page 23
Section 3.3.4, "Rebuilding the Embedded or External Sybase Database," on page 24

3.3.1 Reinstalling the Novell File Upload Extension

If the ZENworks 10 Configuration Management File Upload extension is already installed on the
server that is running ZENworks Control Center, you must reinstall the Novell File Upload
Extension before performing any third-party Imaging operations. For detailed information on how to
reinstall the Novell File Upload Extension, see
Extension," on page 29.

3.3.2 Uploading WAIK

If you are upgrading from ZENworks 10 Configuration Management SP1 (10.1) to ZENworks 10
Configuration Management SP3, and if WAIK was already uploaded prior to the upgrade, you must
upload WAIK (
winpe.wim
SP3. For more information on how to upload WAIK, see the
Management Preboot Services and Imaging

3.3.3 Installing ZENworks Reporting Server

If ZENworks Reporting Server is installed on the ZENworks 10 Configuration Management (10.1)
Primary Server, ZENworks Reporting Server ceases to work when you upgrade the server to
ZENworks 10 Configuration Management SP3.
You need to install a new instance of ZENworks Reporting Server either on the same Primary
Server, or on a different server:
"Installing ZENworks Reporting Server on the Same Primary Server" on page 23
"Installing ZENworks Reporting Server on a Different Server" on page 23
Installing ZENworks Reporting Server on the Same Primary Server
1 Uninstall the existing instance of ZENworks Reporting Server.
For more information on how to uninstall ZENworks Reporting Server, see
ZENworks Reporting
Server Installation Guide.
2 Install ZENworks Reporting Server.
For more information on how to install ZENworks Reporting Server, see the
Configuration Management Reporting Server Installation
Installing ZENworks Reporting Server on a Different Server
1 Decommission the earlier instance of ZENworks Reporting Server, then perform the new
installation.
For more information on how to decommission ZENworks Reporting Server, see
"Decommissioning an Existing Instance of ZENworks Reporting
Configuration Management Reporting Server Installation
Appendix A, "Reinstalling the Novell File Upload
) again after upgrading to ZENworks 10 Configuration Management
Reference.
Server" in the ZENworks 10 Configuration Management Reporting
Upgrading from ZENworks Configuration Management 10.1.x to SP3 (10.3)
ZENworks 10 Configuration
"Uninstalling
ZENworks 10
Guide.
Server" in the ZENworks 10
Guide.
23