Installing Oes 2 Servers In A Xen Vm - Novell OPEN ENTERPRISE SERVER - PLANNING AND IMPLEMENTATION GUIDE 12-2010 Implementation Manual

The various service sections in this guide contain information about completing your OES 2 services
implementation. See the sections for the services you have installed, beginning with
"Managing OES 2," on page

5.2 Installing OES 2 Servers in a Xen VM

Installing OES 2 servers on a Xen virtual machine involves installing an OES 2 SP3 or SUSE Linux
Enterprise Server (SLES) 10 SP3 VM host server, creating a VM, and then installing an OES 2
server (NetWare or Linux) in the VM.
To get started with Xen virtualization in OES 2, see the following:

"Introduction to Xen Virtualization (http://www.novell.com/documentation/sles10/xen_admin/
data/sec_xen_basics.html)" in the
documentation/sles10/xen_admin/data/bookinfo.html)guide.

"Installing OES as a Xen VM Host

"Installing, Upgrading, or Updating OES on a Xen-based
Guide.

"Installing and Managing NetWare on a Xen-based
58 OES 2 SP3: Planning and Implementation Guide
81.
Virtualization with Xen (http://www.novell.com/
Server" in the OES 2 SP3: Installation
VM" in the OES 2 SP3: Installation
VM" in the OES 2 SP3: Installation
Chapter 11,
Guide.
Guide.