Netstorage; Modifying A Cluster; Checking Sles Services; Reconfiguring Services On Other Servers That Point To This Server - Novell OPEN ENTERPRISE SERVER - PLANNING AND IMPLEMENTATION GUIDE 12-2010 Implementation Manual

Planning and implementation guide
Hide thumbs Also See for OPEN ENTERPRISE SERVER - PLANNING AND IMPLEMENTATION GUIDE 12-2010:
Table of Contents

Advertisement

/etc/opt/novell/iprint/conf/DN_of_PSMipsmd.conf
where DN_of_PSM is the name of the Print Manager in eDirectory.
2 Change any entries that list the old IP address to the new IP address.
3 Restart the Print Manager by entering the following command at a terminal prompt:
rcnovell-ipsmd restart
IMPORTANT: Users that have accessed printers through the modified Print Manager will lose
access to their printers.
If you have set up iPrint Client Management on the server, you can automate the
reconfiguration process. If not, users must reinstall the printers.
For more information on iPrint Client Management, see
the
OES 2 SP3: iPrint for Linux Administration

B.6.5 NetStorage

1 At a terminal prompt, enter the following commands:
/opt/novell/xtier/bin/xsrvcfg -D
/opt/novell/xtier/bin/xsrvcfg -d newip -c AuthenticationContext
where newip is the new IP address used throughout this section and AuthenticationContext is
the eDirectory context for NetStorage users. NetStorage searches the eDirectory tree down
from this container. If you want NetStorage to search the entire eDirectory tree, specify the
root context.
rcnovell-xregd restart
rcnovell-xsrvd restart
rcapache2 restart

B.7 Modifying a Cluster

If the server is running Novell Cluster Services, complete the instructions in
Configuration
Information" in the
for
Linux.

B.8 Checking SLES Services

If you have installed SLES or other non-OES services on your OES server, be sure to check the
configuration files for those services for any remaining instances of the IP address that need
changing.
B.9 Reconfiguring Services on Other Servers
That Point to This Server
If you have services on other servers that point to the old IP address for this server, be sure to
reconfigure those services to point to the new IP address.
Guide.
OES 2 SP3: Novell Cluster Services 1.8.8 Administration Guide
.
"Using iPrint Client
Management" in
"Modifying the Cluster
Changing an OES 2 Server's IP Address 243

Advertisement

Table of Contents
loading

This manual is also suitable for:

Open enterprise server 2 sp3

Table of Contents