Novell OPEN ENTERPRISE SERVER - PLANNING AND IMPLEMENTATION GUIDE 12-2010 Implementation Manual page 256

Services Associated with Scripts
iPrint
Linux User Management
Logging
Novell AFP
Novell CIFS
NetStorage (actually XTier)
Novell Cluster Services (NCS)
256 OES 2 SP3: Planning and Implementation Guide
Script Name Notes
cups iPrint uses this daemon.
namcd These daemons are required by Linux User
Management and work together to ensure
nscd
good performance.
The namcd daemon caches user and group
names and IDs from eDirectory, speeding
subsequent lookups of cached users and
groups.
The nscd daemon caches host names and
addresses.
syslog This is used for logging by many OES 2
services.
novell-afptcpd This script starts and stops the afptcpd
daemon, which is the Novell AFP service
daemon
novell-cifs This script starts and stops the cifsd
daemon, which is the Novell CIFS service
daemon
novell-xregd NetStorage runs inside the novell-xsrvd
XTier Web Services daemon, and also
novell-xsrvd
utilizes Tomcat services for certain other
functions.
novell-xregd is the init script for starting and
stopping XTier's registry daemon. It is part
of the
enabled by default for run levels 2, 3, and 5.
novell-xsrvd is the init script for starting and
stopping XTier's Web services daemon. It
is also part of the
RPM and is enabled for run levels 2, 3, and
5.
novell-ncs NCS uses some shell scripts and utilities
that come with the heartbeat package. For
example, NCS uses a binary called
send_arp to send out ARP packets when a
secondary address is bound.
NCS never runs the heartbeat daemons. In
fact, NCS and heartbeat are mutually
exclusive when it comes to execution, and
heartbeat must always be configured to not
run (chkconfig heartbeat off) when NCS is
loaded on the server.
RPM and is
novell-xtier-base
novell-xtier-web