Novell OPEN ENTERPRISE SERVER - PLANNING AND IMPLEMENTATION GUIDE 12-2010 Implementation Manual page 198

also, modify the settings in the
address or port conflict from the second instance.
For example: If a system has two interfaces with two IP addresses 10.1.1.1 and 10.1.1.2,
then the bind setting for two pure-ftpd instances can be Bind 10.1.1.1,21 and Bind
10.1.1.2,21.
3 Load the new instance using
file>
For example:
ftpd1.conf
pure-ftpd1.conf
Verifying the Load of a New Instance
Use the following methods to verify that the new instance of pure-ftpd is successfully loaded:

The
ps –eaf | grep pure-ftpd
system.

The PID file as specified using the PIDFile in the configuration file must be created.

An FTP connection from the client to the server over the IP address being used by the pure-ftpd
instance must be created.
Unloading Specific Instances
A new script
processes. Full path of the configuration file used to load the instance of pure-ftpd must be passed to
the
pure-ftp-stop.pl
For example:
ftpd1.conf
pure-ftp1.conf
The PIDFile of the pure-ftpd instance is also used for unloading the pure-ftpd instance.
Verifying the Unload of a New Instance

The PID file specified using the PIDFile in the configuration file must be deleted.

The number of instances displayed by

An FTP connection request to the server must error out.
Pure-FTPd Remote Access Implementation
After logging in to the eDirectory tree, users can access files and directories on a remote Linux
server whether or not the server is running Linux FTP Server software. The remote server can be
another Linux OES server or an IBM server if they are in the same tree.
198 OES 2 SP3: Planning and Implementation Guide
/usr/sbin/pure-config.pl <Full path of the config
/usr/sbin/pure-config.pl /etc/opt/novell/pureftpd-confs/pure-
loads an instance using the config file
.
is added to unload an instance of pure-ftpd and all its child
pure-ftp-stop.pl
script.
/usr/sbin/pure-ftp-stop.pl /etc/opt/novell/pureftpd-confs/pure-
unloads the instance of pure-ftpd loaded using
.
/etc/pure-ftpd/pure-ftpd.conf
/etc/opt/novell/pureftpd-confs/
command lists all the instances of pure-ftpd loaded on the
/etc/opt/novell/pureftpd-confs/
ps –eaf | grep pure-ftpd
to avoid any IP
must reduce.