Ipling The Suse Linux Enterprise Server Installation System - Novell LINUX ENTERPRISE SERVER 10 SP3 - ARCHITECTURE-SPECIFIC Supplementary Manual

Assign the directories to the guest with DISKMAP USER DIRECT A. You can now
log in on the guest as user LINUX1.
If you do not have the dirmaint option available, refer to the IBM documentation
to set up this user.
Proceed with Section 2.4.2, "z/VM Installation" (page 21).
2.4 IPLing the SUSE Linux Enterprise
Server Installation System
2.4.1 LPAR Installation
There are different ways to IPL SUSE Linux Enterprise Server into an LPAR. The
preferred way is to use the Load from CD-ROM or server feature of the SE or HMC.
IPL from DVD-ROM
Mark the LPAR to install and select Load from CD-ROM or server. Leave the field for
the file location blank or enter the path to the root directory of the first DVD then select
Continue. In the list of options that appears, choose the default selection. Operating
system messages should now show the kernel boot messages.
IPL from FCP-Attached SCSI DVD
You can use the Load procedure by selecting SCSI as Load type to IPL from SCSI.
Enter the WWPN (Worldwide port name) and LUN Logical unit number) provided by
your SCSI bridge or storage (16 digits—do not omit the trailing 0s). The boot program
selector must be 2. Use your FCP adapter as Load address and perform an IPL.
Preparing for Installation 19