Novell LINUX ENTERPRISE SERVER 10 SP3 - ARCHITECTURE-SPECIFIC Supplementary Manual page 43

Example A.3 Network Device Name
Automatic configuration via DHCP?
1) Yes
2) No
> 2
Enter your IP address> 192.168.0.20
Enter your netmask. For a normal class C network, this is usually
255.255.255.0 [255.255.255.0]> 255.255.255.0
If you need a gateway to reach the server, enter the IP address of the
gateway. If you do not need a gateway, enter your own IP address
[192.168.0.20]> 192.168.0.1
Enter the IP address of your name server. If you do not use a name server,
just enter "+++" [192.168.0.20]> 192.168.0.2
A.1.2 Gigabit Ethernet with the qeth Module
Select 1 from the list of network devices for OSA network adapters, then 1 for the
QDIO interface, then 1 for ethernet. When prompted, enter the network device's read,
write, and data channel numbers (for example, 0.0.0808, 0.0.0809, and
0.0.080a) and the port name, if applicable. Choose whether to enable OSI Layer 2
support and enter the relative port number.
Appendix 33