Novell LINUX ENTERPRISE SERVER 10 SP3 - ARCHITECTURE-SPECIFIC Supplementary Manual page 25

accomplished, follow the installation overview of the desired installation mode to install
SUSE Linux Enterprise Server on your system.
As described in Section 2.1, "Making the Installation Data Available" (page 11), there
are two different installation modes for Linux on IBM System z:
• LPAR Installation
• z/VM Installation
Procedure 2.1 Overview of LPAR Installation
1 Prepare the devices needed for installation. See Section 2.3.1, "LPAR Installation"
(page 16).
2 IPL the installation system. See Section 2.4.1, "LPAR Installation" (page 19).
3 Configure the network. See Section 2.5, "Network Configuration" (page 25).
4 Connect to the SUSE Linux Enterprise Server installation system. See Section 2.6,
"Connecting to the SUSE Linux Enterprise Server Installation System" (page 27).
5 Start the installation using YaST and IPL the installed system. See Chapter 3,
Installation with YaST (↑Installation and Administration).
Procedure 2.2 Installation Overview of z/VM Installation
1 Prepare the devices needed for installation. See Section 2.3.2, "z/VM Installation"
(page 17).
2 IPL the installation system. See Section 2.4.2, "z/VM Installation" (page 21).
3 Configure the network. See Section 2.5.1, "z/VM Installation" (page 26).
4 Connect to the SUSE Linux Enterprise Server installation system. See Section 2.6,
"Connecting to the SUSE Linux Enterprise Server Installation System" (page 27).
5 Start the installation using YaST and IPL the installed system. See Chapter 3,
Installation with YaST (↑Installation and Administration).
Preparing for Installation 15