Novell LINUX ENTERPRISE SERVER 10 SP3 - ARCHITECTURE-SPECIFIC Supplementary Manual page 49

• For the ctc interface (no longer officially supported), specify the protocol that
should be used for this interface:
CTCProtocol=<0/1/2>
Valid entries would be:
0
1
2
• Network device type osa with interface lcs:
ReadChannel=0.0.0124
Portname=1
ReadChannel stands for the channel number used in this setup. A second port
number can be derived from this by adding one to ReadChannel. Portnumber
is used to specify the relative port.
• Interface iucv:
IUCVPeer=PARTNER
Enter the name of the peer machine.
• Network device type osa with interface qdio for OSA-Express Gigabit Ethernet
and OSA-Express High-speed Token Ring:
ReadChannel=0.0.0524
WriteChannel=0.0.0525
DataChannel=0.0.0526
Portname=FEF400
For ReadChannel, enter the number of the READ channel. For WriteChannel,
enter the number of the WRITE channel. DataChannel specifies the DATA
channel. For Portname, enter an appropriate port name. Make sure that the READ
channel carries an even device number.
Compatibility mode, also for non-Linux peers other than
OS/390 and z/OS (this is the default mode)
Extended mode
Compatibility mode with OS/390 and z/OS
Appendix 39