Table of Contents
Advertisement
3-5 Advanced BIOS Features
Virus Warning
L1 Cache
L2 Cache
Quick Power On Self Test
SATA & SCSI Boot Order
First Boot Device
Second Boot Device
Third Boot Device
Boot other Device
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
x Typematic Rate (Chars/Sec)
x Typematic Delay (Msec)
Security Option
APIC Mode
MPS Version Control For OS
OS Select for DRAM > 64MB
Report No FDD For Windows
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Virus Warning
Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection. If
this function is enabled and someone attempt to write data into this area, BIOS will show a
warning message on screen and alarm beep.
Disabled (default) No warning message to appear when anything attempts to access the boot
Enabled
CPU L1&L2 Cache
The default value is Enabled.
Enabled (default)
Disabled
Note:
The internal cache is built in the processor.
CPU L3 Cache
Choose Enabled or Disabled. This option enables the Level 3 cache memory.
CPU L2 Cache
Choose Enabled or Disabled. This option enables the Level 2 cache memory.
Quick Power On Self-Test
This category speeds up Power On Self Test (POST) after you power on the computer. If this is
set to Enabled. BIOS will shorten or skip some check items during POST.
Phoenix – AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Disabled
Enabled
Enabled
Enabled
SATA, SCSI
Floppy
HDD-0
CDROM
Enabled
Enabled
On
Fast
Disabled
6
250
Setup
Enabled
1.4
Non-OS2
Yes
F6:Optimized Defaults
sector or hard disk partition table.
Activates automatically when the system boots up causing a warning
message to appear when anything attempts to access the boot sector of
hard disk partition table.
Enable cache
Disable cache
Menu Level >
F7:Standard Defaults
23
Item Help
Advertisement
Table of Contents
