Table of Contents
Advertisement
2-6-2 Pin headers
(1) Line-Out, MIC Header (9-pin): AUDIO
This header connect to Front Panel Line-out, MIC connector with cable.
(2) Serial Port COM2 (9-pin): COM2A (for A210GDMS PRO/A210GDMS)
(3) USB Port Headers (9-pin) : USB2/USB3
These headers are used for connecting the additional USB port plug. By attaching an option
USB cable, your can be provided with two additional USB plugs affixed to the back panel.
(4) Reset switch lead: RESET
This 2-pin connector connects to the case-mounted reset switch for rebooting your computer
without having to turn off your power switch. This is a preferred method of rebooting in
order to prolong the lift of the system's power supply. See the figure below.
(5) IDE Activity LED: HD LED
This connector connects to the hard disk activity indicator light on the case.
AUDIO
2
10
Pin 1
9
Line-Out, MIC Headers
Note: Orient the read marking on the
COM2 ribbon cable to pin 1
COM2A
Pin 1
USB2
USB3
Pin 1
Pin 1
USB Port Headers
15
Advertisement
Table of Contents
