Miscellaneous Control - JETWAY A210GDMS - REV 1.0 User Manual

3-11 Miscellaneous Control

This section is for setting CPU Frequency/Voltage Control.
CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
CPU Ratio
Auto Detect PCI Clk
Spread Spectrum
*** Current Host Frequency is 200MHz ***
CPU Clock at Next Boot is
*** Current DRAM Frequency is 200MHz ***
DRAM Clock at next Boot
CPU Vcore
Over Voltage
VRAM Output
ChipVCC Output
Flash Write Protect
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Auto Detect PCI Clk
This item allows you to enable/disable auto detect PCI Clock.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.
Host Clock at next Boot is
This item allows you to select CPU frequency step by step increasing
The choice are: 200MHz(300MHz.
DRAM Clock at next Boot is
This field displays the capability of the memory modules that you can use
The choice is either 100MHz or 133MHz or 166MHz or 200MHz.
VRAM Output
This item allows you to select 2.5V of the DDR Module. The choice are: 2.5V, 2.6V, 2.7V, 2.8V.
Miscellaneous Control
Default
Enabled
Disabled
200MHz
Auto
Default
Enabled
2.65V(Default)
1.80V(Default)
Enabled
F6:Optimized Defaults
35
Item Help
Menu Level >
F7:Standard Defaults