Table of Contents
Advertisement
Making SATA HDD driver diskette before Install WindowsXP/2000
If you only have Serial ATA HDDs on your system, before you install the Windows XP or Windows
2000, you will need to make a SATA HDD driver diskette before you start to install the Operating
System.
How to make a SATA HDD driver diskette?
STEP 1: Insert the diskette which been formatted in floppy drive on a system which can start OS.
STEP 2: After booting OS insert the bundle CD in your CD-ROM
STEP 3: Copy all the files from X:\ATIRS480\ULISATA\FLOPPY\*.* to floppy diskette
Once you have the SATA driver diskette ready, you may start to install Windows XP or Windows
2000 on your System.
Installation of Windows XP/ Windows 2000
For installation of Windows XP or Windows 2000, please insert Windows XP or Windows 2000 CD
into the CD-ROM drive. Then remove the floppy diskette, and boot the system. At the very
beginning, you will see the message at the bottom of screen, "Press F6 if you need to install a third
party SCSI or RAID driver...."
At this moment, please press <F6> key and follow the instructions of Windows XP or Windows
2000 for the proper installation.
4-6
PC-HEALTH
1. Click PC-HEALTH when MAGIC INSTALL
MENU appears
3. Select Finish after setup complete
NOTE:
MAGIC INSTALL will auto detect file path X:\ATIRS480\MYGUARD\SETUP.EXE
install Intel Hardware Doctor Utility
2. Click Next when Install shield wizard Window
appears, Choose destination location and click
Next, when the start copy file windows appear,
click next
4. Execute MY GUARD utility, On-time
Monitoring your system health
41
Advertisement
Table of Contents
