Wake-Up by PCI card /Power On by Ring
During Disabled, the system will ignore any incoming call from the PCI card/modem. During
Enabled, the system will boot up if there's an incoming call from the PCI card /modem.
Wake-Up on RTC Alarm
This function is for setting date and time for your computer to boot up. During Disabled, you
cannot use this function. During Enabled, choose the Date and Time Alarm:
Date(of month) Alarm
You can choose which month the system will boot up. Set to 0, to boot every day.
Time(hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.
Note:
If you have change the setting, you must let the system boot up until it goes
to the operating system, before this function will work
PM Timer Reload Events
Please refer to section 3-8-1
PCI Express PM Function
Please refer to section 3-8-2
3-8-1
PM Timer Reload Events
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ [A-D] #
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
3-8-2
PCI Express PM Function
PCI Express PME
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Phoenix – AwardBIOS CMOS Setup Utility
PM Timer Reload Events
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
F6:Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
PCI Express PM Function
Enabled
F6:Optimized Defaults
Menu Level >>
F7:Standard Defaults
Menu Level >>
F7:Standard Defaults
39
Item Help
F1:General Help
Item Help
F1:General Help