JETWAY 917PDCPR106 User Manual page 19

1
Replacing Damaged Fasteners
To prevent damage, avoid setting the thermal solution with the prongs down
Set on heatsink side or with fan down
The plastic fasteners on the heatsink can be replaced.
Use Shop Intel to order spare fasteners
http://www.shop-intel.com
To remove a damaged fastener
Note: Protective gloves are not required for this procedure
Rotate the black pin counterclockwise until it "snaps". There will be some resistance
Remove the black pin from the white prong
Tilt the white prong to remove it from the heatsink leg
Avoid damage, avoid placing
prongs on hard surface
Damaged. Attempts to
straighten not recommended
Dry
2
16