Specification - JETWAY 848PDCR2A User Manual

1-2 Specification

Spec
Design
Chipset
CPU Socket
(mPGA478B Socket)
Memory Socket
Expansion Slot &
Headers
Integrate IDE
Integrate Serial ATA ∗ Two Serial ATA ports provide 150 MB/sec data transfer rate
LAN On Board
(for 848PDCP only)
Audio
Magic Duct
BIOS
Multi I/O
∗ ATX form factor 4 layers PCB size: 30.5x21.0cm
∗ Intel 848P Memory Controller Hub (MCH) Chipset
∗ Intel 82801EB I/O Controller Hub (ICH5) Chipset
∗ Support Intel Pentium 4 478 Pin package utilizes Flip-Chip Pin
Grid Array (FC-PGA2) package processor
∗ Support CPU Frequency 400MHz/533MHz/800MHz
∗ Support 1.6G∼3.4G 478 Pin Pentium 4 processor
∗ Support Prescott/ Hyper Threading Processor
∗ Reserves support for future Intel Pentium 4 processors
∗ 184-pin DDR SDRAM module socket x2
∗ Support DDR266/DDR333/DDR400 DDR SDRAM
∗ Expandable to 2.0GB
∗ AGP slot x1 for AGP 0.8V/1.5V standard only, support AGP
2.0/3.0 & 4X/8X mode
∗ 32-bit PCI slot x 5
∗ Two IDE controllers support PCI Bus Mastering, ATA
PIO/DMA and the ULTRA DMA 33/66/100 functions that
deliver the data transfer rate up to 100 MB/s
for two Serial ATA Devices
∗ Realtek RT8100C PCI LAN controller chip for 848PDCP
Supports 10/100 Mb/sec data transfer rate
∗ Realtek ALC 6-channel AC97' Codec integrated
∗ Support 6-channel 3D surround & Positioning Audio
∗ Audio driver and utility included
∗ Enhanced thermal solution to protect MOSFET from burnt out
∗ Award 2Mb Flash ROM
∗ PS/2 keyboard and PS/2 mouse connectors
∗ Floppy disk drive connector x1
∗ Parallel port pin headers x1, Serial port x1
∗ USB 2.0 connector x4, headers x4 (connecting cable option)
∗ Audio connector Line-in, Line-out, MIC
Description
2