JETWAY 848PDCR2A User Manual page 19

(4)
Speaker connector: SPEAK
This 4-pin connector connects to the case-mounted speaker. See the figure below.
(5) IDE Activity LED: IDE LED
This connector connects to the hard disk activity indicator light on the case.
(6) Reset switch lead: RESET
This 2-pin connector connects to the case-mounted reset switch for rebooting your computer
without having to turn off your power switch. This is a preferred method of rebooting in
order to prolong the lift of the system's power supply. See the figure below.
(7) Power LED: PWR-LED
The Power LED is light on while the system power is on. Connect the Power LED
from the system case to this pin.
(8) Power switch: PWR BTN
This 2-pin connector connects to the case-mounted power switch to power ON/OFF the
system.
(9) Wake On-LAN Headers (3-pin) : WOL
This connector connects to a LAN card with a WAKE ON-LAN output.
connector power up the system when a wake up signal is received through the LAN
card.
NOTE: This feature requires that Wake On LAN or Ring In Wake up is enabled.
PWRLED
Pin 1 Pin 1
System Case Connections
WOL
1 3
Wake-On-LAN Headers
16
SPEAK JW_FP
Pin 1
This