Agp Slot - JETWAY 848PDCR2A User Manual

2-5-4 AGP Slot

This motherboard provides an AGP Slot, only support the 1.5V 4X/0.8V 8X AGP VGA
card.
Do not use AGP 2X card (3.3V) in this motherboard.
motherboard due to Intel® 848 chipset can not support AGP 2X (3.3V).
IMPORTANT!
Example 1: SiS 305 & ATi Rage 128 Pro AGP card those golden finger is compatible
with 2X/4X mode AGP slot, but only can support 2X (3.3V) only. If you
install these cards in Intel® 848 based motherboard it will burn and damage
the motherboard.
Example 2: We also find Diamond Vipper V770 golden finger is design for 2X/4X
mode AGP Slot. It can be adjusted the jumper for AGP 2X (3.3V) or
AGP 4X (1.5V). But the factory default setting is 2X (3.3V). If you
install this AGP card in motherboard without change the jumper setting to
4X (1.5V), it will burn the motherboard.
Before you plug-in AGP card, please make sure the following notice
is fully understood and practiced. If your AGP card has "AGP 4X
notch (show below) please make sure your AGP card is AGP 4X/8X
(1.5V/0.8V) not AGP 2X (3.3V)
It will burn and damage the
2x notch
11
4x notch
AGP SLOT