Load Standard/Optimized Defaults; Set Supervisor/User Password - JETWAY 815EDA1A User Manual

This section is for setting CPU Miscellaneous Control.
CMOS Setup Utility – Copyright(C) 1984-2002 Award Software
Cyrix III Clock Ratio
Auto Detect DIMM/PCI Clk
Spread Spectrum
** Current Host Clock is 133 Mhz **
CPU Host/SDRAM/PCI Clock
CPU Clock Ratio
Flash Part Write protect
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Auto Detect DIMM/PCI Clk
This item allows you to enable/disable auto detect DIMM/PCI Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the Spread Spectrum.
CPU/SDRAM/PCI Clock
This item allows you to select the CPU/SDRAM/PCI Clock, refer to
By press PageDown/PageUp key you can change the CPU Host/SDRAM/PCI Clock
When jumper setting CPU Host Clock 66MHz you can choose 66/100/33∼99/149/49MHz
When jumper setting CPU Host Clock 100MHz you can choose 100/100/33∼132/132/44MHz
When jumper setting CPU Host Clock 133MHz you can choose 133/133/33∼200/200/50MHz
When jumper setting CPU Host Clock 133MHz you can choose 133/100/33∼200/151/50MHz
CPU Clock Ratio
This item allows you to select the CPU ratio.
Flash Part Write Protect
This item allow you protect BIOS data, please setting Disabled before upgrade BIOS

3-12 Load Standard/Optimized Defaults

Load Standard Defaults
When you press <Enter> on this item, you get confirmation dialog box with a message similar to:
Load Standard Defaults (Y/N)? N
Pressing <Y> loads the BIOS default values for the most stable, minimal-performance system
operations.
Load Optimized Defaults
When you press <Enter> on this item, you get a confirmation dialog box with a message similar to:
Load Optimized Defaults (Y/N)? N
Pressing <Y> loads the default values that are factory settings for optimal performance system
operations.

3-13 Set Supervisor/User Password

You can set either supervisor or user password, or both of them. The differences are:
Miscellaneous Control
Default
Enabled
Disabled
133/133/33(by HW jumper)
X 3
Enabled
F6:Optimized Defaults
35
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults
Page 11.