Table of Contents
Advertisement
1. When Host clock setting between 66MHz to 99MHz the DRAM clock can setting
Synchronous from 66MHz to 99MHz or Asynchronous from 100MHz to 132MHz.
2. When Host clock setting between 100MHz to 120MHz the DRAM clock can setting
Synchronous from 100MHz to 120MHz, or Asynchronous from 133MHz to 160MHz.
3. When Host clock setting between 121MHz to 149MHz the DRAM clock can setting
Synchronous from 121MHz to 149MHz or Asynchronous from 90MHz to 111MHz.
4. When Host clock setting between 150MHz to 166MHz the DRAM clock can setting
Synchronous from 121MHz to 149MHz or Asynchronous 100MHz to 110MHz.
3-12 Load Standard/Optimized Defaults
Load Standard Defaults
When you press <Enter> on this item, you get confirmation dialog box with a message similar
to:
Load Standard Defaults (Y/N)? N
Pressing <Y> loads the BIOS default values for the most stable, minimal-performance system
operations.
Load Optimized Defaults
When you press <Enter> on this item, you get a confirmation dialog box with a message
similar to:
Load Optimized Defaults (Y/N)? N
Pressing <Y> loads the default values that are factory settings for optimal performance system
operations.
3-13 Set Supervisor/User Password
You can set either supervisor or user password, or both of them. The differences are:
Supervisor password:
User password:
ENTER PASSWORD:
Type the password, up to eight characters in length, and press <Enter>. The password typed
now will clear any previously entered password from CMOS memory. You will be asked to
confirm the password. Type the password again and press <Enter>. You may also press
<Esc> to abort the selection and not enter a password.
To disable a password, just press <Enter> when you are prompted to enter the password. A
message will confirm that the password will be disabled. Once the password is disabled, the
system will boot and you can enter Setup freely.
PASSWORD DISABLED.
When a password has been enabled, you will be prompted to enter it every time you try to
enter Setup. This prevents an unauthorized person from changing any part of your system
configuration.
Can enter and change the options of the setup menus.
Can only enter but do not have the right to change the options of the
setup menus. When you select this function, the following message
will appear at the center of the screen to assist you in creating a
password.
40
Advertisement
Table of Contents
