Integrated Peripherals - JETWAY 815EDA1A User Manual

SDRAM RAS-to-CAS Delay
This field let's you insert a timing delay between the CAS and RAS strobe signals, used when DRAM
is written to, read from, or refreshed. Fast gives faster performance; and Slow gives more stable
performance. This field applies only when synchronous DRAM is installed in the system. The
settings are: 2 and 3.
SDRAM RAS Precharge Time
If an insufficient number of cycles is allowed for the RAS to accumulate its charge before DRAM
refresh, the refresh may be incomplete and the DRAM may fail to retain date. Fast gives faster
performance; and Slow gives more stable performance. This field applies only when synchronous
DRAM is installed in the system. The settings are: 2 and 3.

3-7 Integrated Peripherals

CMOS Setup Utility – Copyright(C) 1984-2002 Award Software
On-Chip IDE Function
On-Chip SIO Function
On-Chip Device Function
Init Display First
Power On Function
KB Power ON Password
Hot Key Power ON
POWER After PWR-fail
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
On-Chip IDE Function
Please refer to section 3-7-1
On-Chip SIO Function
Please refer to section 3-7-2
On-Chip Device Function
Please refer to section 3-7-3
Init Display First
This item allows you to decide to activate whether PCI Slot or on-chip VGA first. The settings are:
PCI Slot, AGP Slot, On-Chip VGA.
Power On Function
This function allows you to select the item to power on the system. The settings are: Button Only,
Mouse Left, Mouse Right, Password, Hotkey, and keyboard 98.
Power After PWR-Fail
This option will determine how the system will power on after a power failure.
Integrated Peripherals
Press Enter
Press Enter
Press Enter
PCI Slot
BUTTON ONLY
Enter
Ctrl-F1
off
F6:Optimized Defaults
28
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults