Install Memory - JETWAY 815EDA1A User Manual

The Design of this motherboard follows chipset and CPU vender's design
WARNING!
guideline. Any attempts to push beyond product specification are not
recommended and you are taking your own risk to damage your system or
important data.
components are able to tolerate such abnormal setting, especially CPU,
memory, hard disks, and VGA cards.

2-4 Install Memory

This motherboard provides
sites for memory expansion available from minimum memory size of 32MB to maximum
memory size of 512MB SDRAM.
Valid Memory Configurations
DIMM
SDRAM Clock
100MHz
133MHz
According the specification when SDRAM clock is 133MHz only can support 2 pcs
Double Sided DIMMs
DS : Double Sided DIMM
SS : Single Sided DIMM
NOTE! Make sure the total installed memory does not exceeds 512MB, otherwise the
system may hang during startup.
Generally, installing SDRAM modules to your motherboard is very easy, you can refer to
figure 2-4 to see what a 168-Pin PC100 & PC133 SDRAM module looks like.
NOTE! When you install DIMM module fully into the DIMM socket the eject tab
should be locked into the DIMM module very firmly and fit into its
indention on both sides.
Before over clocking, you must make sure your
two 168-pin DUAL INLINE MEMORY MODULES (DIMM)
DIMM1
DS
SS
DS
SS
12
DIMM2
DS
SS
DS
SS
Figure 2-4