Pc Health Status; Miscellaneous Control - JETWAY 815EDA1A User Manual

When resources are controlled manually, assign each system interrupt a type, depending on the type
of device using the interrupt.
DMA Resources
This sub menu can let you control the DMA resource.
PCI/VGA Palette Snoop
Leave this field at Disabled. The settings are Enabled, Disabled.

3-10 PC Health Status

This section shows the Status of you CPU, Fan, Warning for overall system status. This is
only available if there is Hardware Monitor onboard.
CMOS Setup Utility – Copyright(C) 1984-2002 Award Software
Show PC Health in Post
Shutdown Temperature
Vcore
Vcc 1.8V
VCC 3.3V
VCC 5V
+12V
-12V
-5V
5VSB
Vbat
System Temperature
CPU Temperature
FAN1 Speed
FAN2 Speed
FAN3 Speed
↑↓→← Move Enter:Select
F5:Previous Values
CPU Temperature
During Enabled, this will warn the user when the CPU temperature reaches a certain temperature.
Current System Temp/Current CPU Temperature/Current FAN1, FAN2, FAN3 Speed/
Vcore/VTT/3.3V/+5V/+12V/-12V/ -5V/VBAT(V)/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.
Shutdown Temperature
This option is for setting the Shutdown temperature level for the processor. When the processor
reaches the temperature you set, this will shutdown the system.

3-11 Miscellaneous Control

PC Health Status
Enabled
Disabled
1.65V
1.85V
3.3V
4.97V
11.90V
(-)12.03V
(-) 5.10V
4.97V
3.29V
25 ° C
35 ° C
5843 RPM
6132 RPM
5720 RPM
+/-/PU/PD:Value F10:Save ESC:Exit
F6:Optimized Defaults
34
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults