JETWAY 815EDA1A User Manual page 20

(7) Power switch: PWR BTN
This 2-pin connector connects to the case-mounted power switch to power ON/OFF the system.
(8) Wake On-LAN Headers (3-pin) : WOL
This connector connects to a LAN card with a WAKE ON-LAN output. This connector
power up the system when a wake up signal is received through the LAN card.
NOTE: This feature requires that BIOS Wake-Up by PCI Card is enabled.
(9) FAN Speed Headers (3-pin) : FAN1, FAN2, FAN3
These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the
fan manufacturer, the wire and plug may be different. The red wire should be positive,
while the black should be ground. Connect the fan's plug to the board taking into
consideration the polarity of connector.
FP
Pin 1
Pin 1
System Case Connections
WOL
1 3
Wake-On-LAN Headers
1 3
FAN1
1 3
FAN2
1 3
FAN3
18
SPEAK