Hawking HAWNU1 User Manual page 72

Hi-gain wireless-150n usb network adapter with range amplifier
Hide thumbs Also See for HAWNU1:
Table of Contents

Advertisement

Scenario
I can't find any wireless
access point / wireless device
in 'Site Survey' function.
Nothing happens when I click
'Launch Config Utility'
I can not establish connection
with a certain wireless access
point
The network is slow / having
Solution
1. Click 'Rescan' for few more times and see if you can
find any wireless access point or wireless device.
2. Please move closer to any known wireless access
point.
3. 'Ad hoc' function must be enabled for the wireless
device you wish to establish a direct wireless link.
4. Please adjust the position of network card (you may
have to move your computer if you're using a
notebook computer) and click 'Rescan' button for
few more times. If you can find the wireless access
point or wireless device you want to connect by
doing this, try to move closer to the place where the
wireless access point or wireless device is located.
1. Please make sure the wireless network card is
inserted into your computer's USB port. If the
Hawking configuration utility's icon is black, the
network card is not detected by your computer.
2. Reboot the computer and try again.
3. Remove the card and insert it into another USB port.
4. Remove the driver and re-install.
5. Contact the dealer of purchase for help.
1. Click 'Connect' for few more times.
2. If the SSID of access point you wish to connect is
hidden (nothing displayed in 'SSID' field in 'Site
Survey' function), you have to input correct SSID of
the access point you wish to connect. Please contact
the owner of access point to ask for correct SSID.
3. You have to input correct security key to connect an
access point with encryption. Please contact the
owner of access point to ask for correct security key.
4. The access point you wish to connect only allows
network cards with specific MAC address to
establish connection. Please go to 'About' tab and
write the value of 'Phy_Addess' down, then present
this value to the owner of access point so he / she
can add the MAC address of your network card to
his / her access point's list.
1. Move closer to the place where access point is
65

Advertisement

Table of Contents
loading

Table of Contents