Hawking HAWNU1 User Manual page 30

To set authentication / encryption information for the access point. Please select 'Auth. \
Encry.' tab:
Auth.\Encry Overview:
Item Name Description
Authentication Select the authentication type of the wireless access point or wireless
device you wish to connect. When you are adding a profile from an
existing access point or wireless device, authentication type will be
selected automatically, and please do not change it.
If you select 'LEAP', you'll be prompted to input LEAD specific
settings:
Please input LEAP identity, password, domain name, and select
encryption type. You can check 'Show Password' box so the password
you inputted will be displayed as you type, and not be replaced by
asterisk.
Encryption Select the encryption type of the wireless access point or wireless
device you wish to connect. When you are adding a profile from an
existing access point or wireless device, the encryption type will be
selected automatically, and please do not modify it.
WPA Preshared Input WPA preshared key here. If encryption is not enabled, or you
Key select 'WEP' as encryption type, this field will be disabled and grayed
out.
23