Table of Contents
Advertisement
WEP Key
You can select key type (Hexadecimal or ASCII) and input WEP key
here. If encryption is not enabled, or you select 'WPA' as encryption
type, this field will be disabled and grayed out. You can set up to 4 WEP
keys here.
There are two types of WEP key, Hexadecimal and ASCII. For
Hexadecimal key, you can input number 0-9 and alphabet a-f; for
example, '001122aabbcc'; For ASCII key, you can input number 0-9
and alphabet a-z; for example, mywepkey12345.
The length of WEP key depends on the type of WEP key you selected.
You can input 10 or 26 hexadecimal characters and 5 or 13 ASCII
characters as WEP key.
Show Password
Check this box and all passphrases or security keys you inputted will be
displayed as you type, but not replace your input with asterisks.
Use 802.1x
If the access point you wish to connect requires 802.1 x authentications,
please click on 'Use 802.1x' box, then click '802.1X' tab to set 802.1x
parameters.
To set 802.1x authentication for the access point. Please click '802.1X' tab:
802.1X Tab Overview:
Item Name
Description
EAP Method
Select 802.1 x EAP methods from the dropdown menu. Ask your
network administrator or the access point owner if you do not have this
information.
Tunnel
Select 802.1x tunnel authentication type from dropdown menu. Please
Authentication
ask the administrator of the access point you wish to connect to select a
correct tunnel authentication method. This pull down menu is only
available when authentication type you use is 'PEAP', 'TLS / Smart
Card', or 'TTLS'.
24
Advertisement
Table of Contents
