Hawking HAWNU1 User Manual page 25

Note:

Connect to an access point without an SSID: you'll be prompted to input the SSID.
If you don't have the SSID, please ask the owner of wireless access point for the
exact SSID and input it here, then click 'OK' when ready. If the SSID you provided
here is wrong, you'll not be able to connect to this access point.

Connect to an open wireless network (no encryption) - If the access point you
selected does not use encryption, you will be connected to this wireless access point
within one minute.

Connect to an encrypted access point – you'll be prompted to input its WEP key or
WPA preshared key.
Please ask the owner of the wireless access point you want to connect to, and input the
correct key here and then click 'OK'. By checking 'Show Password' box, the encryption key
you inputted here will be displayed.
If the value you filled out is incorrect, you will not be able to connect to this wireless access
point.
Authentication type will be selected by the authentication type of the access point
automatically, please don't change it.
However, if you're connecting to an access point using 802.1x authentication, you have to
check '802.1x' box and input related information. Instructions for 802.1x authentication will
be given later.
If the wireless access point is successfully connected, you'll see a
of the name of the wireless device.
18
symbol appear in front