VINCENT SA-96 Instructions For Use Manual page 37

The play function of the MP3 player and the USB functions are independent of the choice of input. If the
SA-96 preamplifier is switched on, a USB device can be attached or playback can be started or finished
at any time.
Operation
Plug in the
USB storage medium
Play MP3s
Remove the
USB storage medium
INTEGRATED MP3 PLAYER
Button(s)
Description
Connect the USB stick or USB–A plug of the device to be connected
to the USB socket (9) of the SA-96. This can be done at any time,
even if another input (3) has been selected. The now following
registering procedure is performed automatically. If a suitable device is
connected, then the LED "DISK" (4) lights up. First all directories and
their subdirectories will be searched for files with the suffix ".mp3".
If at least one suitable file is found, the display "MP3" (5) lights up.
Please note that a search will be performed only for files with an
".mp3" suffix and no check will be made on whether such files are
valid MP3 files. Files wrongly marked with the "MP3" file extension
will be played without sound.
It is only after the search procedure that pressing the "PLAY/PAUSE"
button (1) activates the start of playback. The LED "PLAY" (6) is lit
during playback. In order to be able to hear the current playback of
the MP3 files through headphones or connected end amplifiers, the
input "USB" must be selected on the "INPUT" input selection dial (3).
The files stored on the main directory of the storage medium are
(PLAY/PAUSE)
played first, followed by the files in the subdirectories. It is possible
during MP3 playback to switch to the other input channels without
interrupting the MP3 playback. If you press the "PLAY/PAUSE" (1)
again, you activate and deactivate the playback pause.
(SKIP back)
The LED "PLAY" is switched off during the pause.
By using the SKIP buttons (1) you can skip to the next or the previous
(SKIP
track during playback. These buttons cannot be used for fast forward
forward)
or reverse.
RESET
The device has no separate "STOP" button. To stop playback, press the
"RESET" button (1) on the front of the device. The index of contents will
then be read in again from the storage medium.
The SA-96 preamplifier has no separate button for logging off from or
ejecting the USB device. Before you remove the USB plug or the USB
device, put the built-in player into "STOP" mode by pressing the "RESET"
button (1) and waiting for 20 seconds until the index of contents has
RESET
been read in again. This is finished when the LED "MP3" (4) is
constantly lit or the search for music tracks has not produced any results
within 20 seconds. With USB sticks you will know this by the fact that its
LED ceases to flash. Only then is it safe to break the USB connection.
It is not possible to use USB host devices such as for
instance personal computers.
Vincent
37