VINCENT SA-96 Instructions For Use Manual page 27

1
2
3
7
8
9
10
FRONT VIEW
1. Keys for MP3 playback control
These are the buttons for controlling the
playback of the built-in MP3 player.
2. VOLUME: Volume dial
This is the knob for the adjustment of the main
volume level of the system. It consequently
controls the volume of the headphone and the
signal of the stereo preamplifier outputs (14).
3. INPUT: Input Selector
This dial allows you to choose one of the four
input sources (USB, S1, S2 or S3).
4. LED "DISK"
This LED remains illuminated as long as a
supported USB memory or USB player is
connected to the SA-96.
5. LED "MP3"
4
This LED remains illuminated as long as a
5
supported USB device that contains supported
MP3 files is connected to the SA-96.
6
6. LED: "PLAY"
This LED remains illuminated as long as MP3
files are being played back by the SA-96.
7. SR: Infrared receiver for the
remote control
8. PHONES: Headphone socket
Headphones with an impedance of at least 32Ω
can be connected to this 6.3 mm jack socket.
9. USB: Connection socket for
USB storage medium
You can connect a USB storage medium here.
If this contains MP3 files, these can be played
with the MP3 player built into the SA-96.
10. POWER
This is the main power switch for turning on
and off the device. The SA-96 is separated
from the mains voltage when switched off and
cannot be set into a standby state.
Vincent
27