VINCENT SA-96 Instructions For Use Manual page 32

CONNECTION OF THE SOURCE EQUIPMENT WITH
You can connect up to three devices with analogue stereo high level output such as a CD player in order
to provide the audio signals of your input sources to the system. The output sockets on the source equip-
ment are usually indicated by "Line Out", "Audio Out" or "Front Out". You will find information about
ways to connect source equipment in their operating manuals. The audio inputs "S1", "S2" and "S3"
represent electrically equivalent standard high level inputs with RCA connection. They have an identical
function and differ only in name.
To use a record player you need a so-called equaliser preamplifier (also called a phono pream-
plifier), which is installed in the signal path between the record player and one of the high-level
inputs. Some models of record player already include this preamplifier and can be connected
directly. You will find further information in this appliance's operating manual.
The stereo sound of appliances that use output connectors other than RCA (DIN plugs, jack
plugs) can often also be used with the aid of adaptors.
SA-96
CONNECTION OF A RECORDING DEVICE
If you want, you can use the RCA sockets "OUTPUT REC" (12) on the back of the appliance to connect
an analogue stereo recording device (e.g. CD recorder, cassette recorder etc.) or another appliance that
is intended for receiving the unchanged, fixed stereo output level (line level) from the signal source selec-
ted on the preamplifier at any given time. The output level is independent from the volume setting and the
"MUTE" command. Connect this signal output to the signal input ("LINE IN", "TAPE IN" oder "REC IN")
on the recording appliance using RCA cables.
SA-96
Vincent
32
RCA HIGH LEVEL OUTPUTS
RCA connection
RCA connection
CD player, tuner etc.
LINE OUT
Recording device,
e.g. tape recorder
LINE IN