Touch Sensor Tone; Manual Clock Adjustment; Dsi (Disabled System Indicator); Display Illumination Control - Kenwood KDC-MP632U - USB/AAC/WMA/MP3/CD Receiver With External Media Control Instruction Manual

In Standby mode
Touch Sensor Tone
Setting the operation check sound (beep sound)
ON/OFF.
Display Illumination Control
This function turns off the display when you
perform no operation for 5 seconds. This function
is effective when you are driving at night.
IIBEEP ON II
IIBEEP OFF II
Beep is heard.
Beep canceled.
1I0lSP ON II
1I0lSP OFF' I
~
~
Keeps the display on.
Turns off the display when you perform no
operation for 5seconds.
In Standby mode
Manual Clock Adjustment
1
Select Clock Adjustment mode
Push the Control knob towards [FM] or [AM].
Select the IICLK ADJ
II
display.
2
Enter Clock Adjust mode
Press the Control knob for at least 1 second.
The clock display blinks.
3
Adjust the hours
Push the Control knob towards [FM] or [AM].
Adjust the minutes
Push the Control knob towards
[~]
or
[~].
4
Exit Clock adjustment mode
Press the [MENU] button.
• Set the Display Illumination Control when the
<Demonstration mode Setting> (page 34) is set to
OFF.
• When the display is off, pressing any key will turn on
the display.
• When the display is off, you cannot perform any
operation except for the following:
• Volume
• Attenuator
• Selecting the source
• Ejecting the disc
• Turning off the power
• During function control, such as the Menu System, the
display stays on.
In Standby mode
Dimmer
Dimming this unit's display automatically when
the vehicle light switch is turned ON.
In Standby mode
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the
faceplate is removed, warning potential thieves.
1I01MON"
1I0lMOFF
li
The display dims.
The display doesn't dim.
1I0SION II
11051 OFF'
LED fiashes.
LED OFF.
English
I 29