Contents Before use Basic Operations of remote ..........12 Safety Precautions ................3 Installation Handling Compact Discs ...............4 Accessories.................14 Loading Compact Discs ..............5 Installation Procedure..............14 General features Installation ...................15 Power....................6 Connecting Wires to Terminals...........17 Selecting the Source ..............6 Troubleshooting guide ............18 Disc control features Specifications .................21 Playing Disc...................7...
• Check that no metal objects (coins, tools, • If you have difficulty in installing this unit in indicator characters. etc.) are left inside the unit to avoid short your vehicle, contact your Kenwood dealer. circuits. • If it doesn’t seem to be working properly, Lens fogging •...
Handling Compact Discs Playing a CD that is dirty, scratched or music CD to damage from high temperatures and Do Not Load CD Accessories humidity, and in some cases, may become warped can cause the sound to skip and Do not use commercially available CD accessories unusable if left in the car for long periods of time.
Make sure the disc magazine is the Open the CD changer door. Use the CD changer with its door closed right way up with the Kenwood logo to prevent the entry of dust into the on the top.Pull the tray out by the changer.
General features Set the car radio FM station to 88.3 MHz. See Page 11 for more information on changing the transmission frequency. Power Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. The FM modulator is turned OFF and the radio can be heard.
Disc control features Playing Disc Play: Press the [SRC] button. ¢ Select the "CHANGER"/ "CHANGER-1"/ "CHANGER-2" display. Stop the play: Press the [SRC] button for at least 1 second. The FM modulator is turned OFF and the radio can be heard. Pause and play: Press the [ ] (38...Remote...
Disc control features Disc Search Track/Disc Repeat Selecting the disc set in the Disc changer. Replaying the song, disc in the Disc changer you're listening to. Press the [u] or [d] button. Press the [REP] button. When it's ON, the "REP" indicator is ON. Each time the button is pressed the Repeat Play switches as shown below.
Magazine Random Play (Function of disc changer) Play the songs on all the discs in the disc changer in random order. Press the [M.RDM] button. Each time the button is pressed the Magazine Random Play turns ON or OFF. When it's ON, the "RDM" indicator is ON and the track and disc number blink.
Menu system Menu System The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after MENU this operation explanation. Enter Menu mode Press the [MENU] button for at least 1 second. "MENU"...
Changing the Transmission Frequency Dynamic control Select the frequency. Settingt the Dynamic control. Display Setting Display Setting "T-FREQ 87.7" 87.7 MHz "D-CONT ON" The dynamic control is ON. "T-FREQ 87.9" 87.9 MHz "D-CONT OFF" The dynamic control is OFF. (Initial setting) "T-FREQ 88.1"...
Basic Operations of remote Loading and Replacing the battery Use two "AA" batteries. Slide the cover while pressing downwards to remove it as illustrated. – Insert the batteries with the poles aligned properly, following the illustration inside the case. T.UP/T.DOWN D.REP D.REP DOWN...
Page 13
In Disc source [T.UP]/ [T.DOWN] buttons Doing track forward and backward. [+]/ [–] buttons Doing disc forward and backward. [38] button Each time the button is pressed the song pauses and plays. [REP] button Each time the button is pressed Track Repeat function turns ON or OFF.
Accessories External view 2WARNING ..Number of items When drilling a hole in the car chassis to install the unit, check first that nothing is on the other side. 2CAUTION ..1 ..4 • If the fuse blows, first make sure the wires aren’t touching to cause a short circuit, then replace the old fuse with one with the same rating.
Installation ■ ■ Angle adjustment switches Installation of Display unit The angle adjustment switches on the both saides of the unit • Installation without using the trim mount plate are to be set according to the angle of installation of the CD Display unit auto changer.
Page 16
Installation ■ ■ Horizontal installation In case of hanging in the trunk Use the holes marked (¶) to install the unit. Use the holes marked (¶) to install the unit. Bottom view Bottom view φ 4 Side view Side view φ...
Connecting Wires to Terminals CD auto-changer Display unit Output Control output Changer connection wire 4 Control input CD auto - changer input FM modulator unit FM/AM antenna input Antenna plug for automobile Car stereo with FM tuner FM/AM antenna output Ignition key switch Ignition wire...
Troubleshooting Guide What might seem to be a malfunction in your unit may Disc source just be the result of slight misoperation or miswiring. CD play does not start.52 Before calling service, first check the following table for ✔ CD auto-changer input is not connected to the unit. possible problems.
Page 19
Sound skips due to vibration.67 ✔ Something is touching the CD auto-changer. ☞ Keep it away from the CD auto-changer. ✔ The disc is dirty or damaged.68 ☞ If sound skips at the same part, the disc is faulty. Check and, if possible, clean the disc.
Page 20
Troubleshooting Guide The messages shown below display your systems condition. EJECT: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. ➪ Load the disc magazine properly. NO DISC: No disc has been loaded in the disc magazine. ➪...