1. Manuals
  2. Brands
  3. Kenwood Manuals
  4. Car Receiver
  5. KDC-MP632U - USB/AAC/WMA/MP3/CD Receiver With External Media...
  6. Instruction manual

Kenwood KDC-MP632U - USB/AAC/WMA/MP3/CD Receiver With External Media Control Instruction Manual

Instruction manual
Hide thumbs Also See for KDC-MP632U - USB/AAC/WMA/MP3/CD Receiver With External Media Control:
Table of Contents

Advertisement

Quick Links

KDC-X590
KDC-MP632U
KDC-MP532U
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE D'EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Kenwood Corporation
SIRIUS~
REA
0
Y
H3'Radio®
'!JREADY
~
AAC
~
PHATNOISE
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model KDC-X590/MP632U/MP532U Serial number
_
US Residence Only
© 864-3343-00/01 (KW)

Advertisement

Table of Contents
loading

Related Manuals for Kenwood KDC-MP632U - USB/AAC/WMA/MP3/CD Receiver With External Media Control

Summary of Contents for Kenwood KDC-MP632U - USB/AAC/WMA/MP3/CD Receiver With External Media Control

  • Page 1 Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KDC-X590/MP632U/MP532U Serial number US Residence Only ©...

  • Page 2: Table Of Contents

    Contents Switching the Play mode Safety precautions Letter. Seek Notes TextlTitle Scroll HD Radio control features About CDs About HD Radio About AAC, MP3 and WMA Tuning Menu system About USB device Menu System General features Activating Security Code Deactivating Security Code Power Touch Sensor Tone Selecting the Source...
  • Page 3 If this equipment does cause harmful TOKYO, JAPAN interference to radio or television reception, which KENWOOD CORP. CERTIFIES THIS EQUIPMENT can be determined by turning the equipment off and on, the user is encouraged to try to correct CONFORMS TO DHHS REGULATIONS NO.21 CFR the interference by one or more of the following 1040.10, CHAPTER 1, SUBCHAPTER...

  • Page 4: Safety Precautions

    1998 or later can be connected to this unit. • To preventa short circuit, never put or leave any Refer to the catalog or consult your Kenwood metallic objects (such as coins or metal tools) dealer for connectable models of disc changers! inside the unit.

  • Page 5: Notes

    Kenwood dealer. - When you purchase optional accessories, check & with your Kenwood dealer to make sure that they • Applying spray cleaner directly to the unit may affect its work with your model and in your area.
  • Page 6 Notes About SIRIUS Satellite radio tuner: Refer to the instruction manualof SIRIUS Satellite /SR902/SR903 radio tuner KTC-SR901 (optional accessory), when connected; for the operation method. • Refer to the sections ofA models for operations. 5,~i~1 "'7,_ ... iii ..- - - - I 1 - 6 AM SRC DISPIC.S.

  • Page 7: About Cds

    About CDs Handling CDs Removing CDs When removing CDs from this unit, pullthem out • Do not touch the recording surface of the CD. horizontally. CDs that cannot be used • CDs that are not round cannot be used. • CD-R and CD-RW are easier to damagethan a normalmusictb.

  • Page 8: About Aac, Mp3 And Wma

    Playable AAC file folder (CD-R/RW) m4a" file encoded by AAC-LC format. • • Maximum number of directory levels: 8 Refer to http://www.kenwood.mediamanager.jp • Maximum number of folders: 100 for the details. • Maximum number of files per folder: 4096 Playable MP3 file •...
  • Page 9 Playing order of the Audio file • The Audio file plays in the order which is written by CD writing software. You may be able to set the playing order: by writing the play sequence numbers such as "01" to "99" at the beginning of the file name.

  • Page 10: About Usb Device

    About USB device Notes on Use of the USB device & This unit can play audio files stored in the flash Install the USB device in the place where it will not memory and digital audio player that have a USB vehi~le prevent you from driving your properly.

  • Page 11: General Features

    General features KENWOOD Control knob Clock display :t.:: , :' ,no::. : : .: : .: ~f..) =.:...=. = .: --_. .. ---- ---_. _---- ._--------- ILOUDI~ .::::~:::=. -----~-~---- LOUD indicator ATT indicator Power Volume Turning ON the Power Increasing Volume Press the [SRC] button.

  • Page 12: System Q

    General features System Q Audio Control Selecting the best sound setting preset for Select the source to adjust different types of music. Press the [SRC] button. Select the source to set Enter Audio Control mode Press the [SRC] button. Press the [VOL] knob. Select the Sound type Select the Basic Audio item to adjust Press the [Q] button.

  • Page 13: Adjusting The Detail Of Audio Control

    Function KDC-X590 Adjusting the detail of Audio Control Among the Basic Audio items, you can adjust the Bass level, Middle level, and Treble level in detail. Select the Basic Audio item Select the desired item to be set in detail from followings;...

  • Page 14: Audio Setup

    General features Audio Setup - Adjust the volume of Rear channel by <Audio Control> (page 12). Setting the Sound system, such as Cross over - The Audio Control has no effect on sub source. Network. • You can use the Dual Zone System with the Auxiliary input sources listed below.

  • Page 15: Subwoofer Output

    In HD Radio source Function the KDC-X590/KDC-MP632U Subwoofer Output liST NAME II * Station name Turning the Subwooferoutput ON or OFF. Song title/ Artist name/ Push the Control knob toward [AM] for at Album name/ Genre least 2 seconds. IIFREQII Frequency Each time you push the knob, Subwoofer output IICLOCK...

  • Page 16: Theft Deterrent Faceplate

    General features Theft Deterrent Faceplate TEL Mute The faceplate of the unit can be detached and The audio system automatically mutes when a taken with you, helping to deter theft. call comes in. comes in Removing the Faceplate When call "CALL' is displayed.

  • Page 17: Tuner Features

    Tuner features Frequency display ..... ST indicator Tuning Tuning Mode Selecting the station. Choose the tuning mode. Press the [AUTO] button. Select tuner source Each time you press the button, the Tuning Press the [SRC] button. mode alternates between the modes shown in Select the "TUNER"...

  • Page 18: Direct Access Tuning

    Tuner features Function the KDC-X590/KDC-MP632U Auto Memory Entry Function remote control Putting stations with good reception in the Direct Access Tuning memory automatically. Entering the frequency and tuning. Select the band for Auto Memory Entry Select the band Push the Control knob towards [FM] or [AM]. Press the [FM] or [AM] button.

  • Page 19: Cd/Usb Device/Audio File/External Disc Control Features

    CD/USB device/Audio file/External disc control features Control knob Release button S.MOOE SCAN ROM!3! F.SEL M.ROM A.ROM Track number Play time ~~I!==:: :~.~!::::i: == . . : · C.:: if..) i if..)· if..) .. --- ----_ FOLDER P. LIST ARTIST -- .. _._.--_ ALBUM GENRE...

  • Page 20: Playing Usb Device

    CD/USB device/Audio file/External disc control features Playing USB device Playing External Disc Playing discs set in the optional accessory disc Playing USB device player connected to this unit. Select a source other than the USB device Press the [SRC] button. Press the [SRC] button.

  • Page 21: Track/File Search

    Function disc changers with remote control Track/File Search Direct Disc Search Searching for a song on the disc or in the Audio file folder. Doing Disc Search by entering the disc number. Push the Control knob towards Enter the disc number [~].

  • Page 22: Scan Play

    CD/USB device/Audio file/External disc control features Function of disc changer Scan Play Magazine Random Play Playing the first part of each song on the disc or Audio file folder you are listening to"and Play the songs on all the discs in the disc changer searching for the song you want to hear.

  • Page 23: Select Mode

    Function Audio file Function Audio file Select mode File Select mode Quickly selecting the file or folder you want to You can select an audio file in the folder currently hear. being played by file name. Select the Select mode Enter File Select mode Press the [F.SEL] button.

  • Page 24: Folder Select 1 Mode

    CD/USB device/Audio file/External disc control features Function Audio file Function Audio file Folder S,lect mode Folder Select 2 mode the target folder by tracing the hierarchical Select the target folder within the folders 'Select containing audio files. The folder which contains levels of folders.
  • Page 25 Function the KDC-X590/KDC-MP632U Function the KDC-X590/KDC-MP632U Function ACDrive media Function ACDrive media Switching the Play mode Letter Seek Arrange the playing orders of the songs by You can search for the song, you want to play, by categories. selecting the initial of Genre name, Artist name, or Album name.

  • Page 26: Hd Radio Control Features

    HD Radio control features Frequency display Band display ~:.c·:: .... ("i ..= = =. ~~~~~~§~~§: 1------------11----- Sf indicator Preset station number About HD Radio Tuning Selecting the station. • When you connect an HD Radio, Tuner features of the unit are disabled and changed to HD Select HD Radio source Radio tuner features.

  • Page 27: Menu System

    Menu system @~oo ~,Q~.MENU S'----.MOOE~.A.R~DM~ ~ - knob ~..:.:.:.-Control ..,... i ..MENU ............ Menu display You can continue by returning to step 2 and Menu System setting other items. Setting beep sound during operation, etc.

  • Page 28: Activating Security Code

    Menu system In Standby mode Resetting the Security Code function when Activating Security Code the audio unit first used after removed from the battery power source or the Reset Activating the Security Code disables the usage button is pressed of audio unit by someone else. Once the Security Turn the power ON.

  • Page 29: Touch Sensor Tone

    In Standby mode Display Illumination Control Touch Sensor Tone This function turns off the display when you perform no operation for 5 seconds. This function Setting the operation check sound (beep sound) ON/OFF. is effective when you are driving at night. IIBEEP ON II 1I0lSP ON II Beep is heard.

  • Page 30: Switching Preout

    Menu system Function the KDC-MP632U Function the KDC-X590 In Standby mode Other than Standby mode Switching preout B.M.S. (Bass Management System) Alternating the preout between the rear and Adjust the bass boost level of the external subwoofer. (With the subwoofer the sound amplifier using the main unit.

  • Page 31: Amp Control

    Function the KDC-X590 In HD Radio mode When LX AMP unit connecting Receive mode Setting AMP Control Sets the receive mode. You can control the LX AMP connected to the Select the Receive mode unit. Push the Control knob towards [FM] or [AM]. Select AMP Control mode Select the "HDR MODE"...

  • Page 32: Auxiliary Input Display Setting

    Menu system Auxiliary Input Display Setting Text Scroll Selecting the display when alternating to Setting the displayed text scroll. Auxiliary input source. "SCL AUTO" Repeats scroll. Select Auxiliary input source Press the [SRC] button. "SCL MANU" Scrolls when the display changes. Selectthe "AUX"j"AUX EXT"...

  • Page 33: Voice Index

    Function the KDC-X590IKDC-MP632U Function the KDC-X590/KDC-MP632U Function ACDrive media Other than Standby mode Voice Index Audio Preset Memory Setting the announcement during the play of Registering the value setup by Sound Control. The ACDrive media. memory cannot be erased by the Reset button. Setup Sound Control "V-ID ON"...

  • Page 34: Audio Preset Recall

    Menu system Function the KDC-X590/KDC-MP632U In Standby mode Other than Standby mode Demonstration mode Setting Audio Preset Recall Sets the demonstration mode. Recalling the sound setup registered by <Audio Select the Demonstration mode Preset Memory> (page 33). Push the Control knob towards [FM] or [AM]. Select the source Select the "DEMO"...

  • Page 35: Basic Operations Of Remote Control

    Basic Operations of remote control VOL--~- mtWJo..AUD-~--em rnu-~--~II ~~~-- DIRECT 4 _ _ [O]-[9]-~~ Loading and Replacing the battery Basic operations [VOL] buttons Adjusts the volume. [SRC] button Each time you press the button, the source alternates. For the source alternating order refer to <Selecting the Source>...
  • Page 36 Basic Operations of remote control Audio Control In Disc/USB source [~]/ [~] [AUD] button buttons Selects the Audio item to be adjusted. Going forwards and backwards between track! files. [VOL] buttons [+]1 [-] buttons Adjusts the Audio item. Going forwards and backwards between disci folders.
  • Page 37 In HD Radio source [FM] button Selects the HD FM band. Each time you press the [FM] button, the band alternates between the HF1, HF2, and HF3 bands. [AM] button Selects the HD AM band. [~]I [~] buttons Tunes up or down bands. [0] - [9] buttons Press buttons...

  • Page 38: Accessories/Installation Procedure

    Accessories/ Installation Procedure Accessories 5. Connect the wiring harness connector to the unit. 6. Install the unit in your car. 7. Reconnect the battery. 8. Press the reset button... 1 AWARNING If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire.

  • Page 39: Connecting Wires To Terminals

    FM/AM antenna input To connect these leads, refer to ~ the relevant instruction manuals. To Kenwood disc changer/ External optional accessory If no connections are made, do not let the wire come out from the tab. When using the optional power amplifier, Power control wire (Blue/White) connect to its power control terminal.
  • Page 40 FM/AM antenna input To connect these leads, refer to ~ the relevant instruction manuals. To Kenwood disc changer/ External optional accessory If no connections are made, do not let the wire come out from the tab. When using the optional power amplifier, Power control wire (BluelWhite) connect to its power control terminal.
  • Page 41 Connect to the terminal that is grounded TEL mute wire (Brown) when either the telephone rings or during conversation. To connect the Kenwood navigation system, consult your navigation manual. Dimmer control wire (Orange / White) To car light control switch...

  • Page 42: Installation

    Installation non-Japanese cars Japanese cars Refer to the section <Removing the hard rubber Metal mounting strap frame> (page 44) and then remove the hard (commercially available) rubber frame. Firewall or metal support Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws.
  • Page 43 Screwing the Faceplate on the Unit Tighten the screw (02 x 5 mm) (Accessory@) and bracket (Accessory0) in the hole shown on If you want to fasten the faceplate to the main the diagram. unit so that it does not fall off. Refer to the section <Removing the hard rubber frame>...

  • Page 44: Removing The Unit

    Removing the Unit Removing the hard rubber frame Removing the Unit Engage the catch pins on the removal tool and Refer to the section <Removing the hard rubber remove the two locks on the upper level. frame> (page 44) and then remove the hard Upper the frame and pull it forward as shown in rubber frame.

  • Page 45: Troubleshooting Guide

    Troubleshooting Guide What might seem to be a malfunction in your unit No sound can be heard, or the volume is low. may just be the result of slight misoperation or The fader or balance settings are set all the way to one side.
  • Page 46 Troubleshooting Guide Tuner source Audio file source Radio reception is poor. Cannot play an Audio file. V' The car antenna is not extended. V' The media is scratched or dirty. Pull the antenna out all the way. Clean the media, referring to the CD cleaning 1&...
  • Page 47 ¢---- ¢ USB device again referring to www. COPY PRO: A copy-protected file is played. kenwood.com/usb!. If the error ¢---- message is still displayed, initialize the USB device or use other USB devices. DEMO MODE: The Demonstration mode has been selected.

  • Page 48: Specifications

    Specifications Specifications subject to change without notice. FM tuner section Audio section Frequency range (200 kHz space) Maximum output power : 87.9 MHz - 107.9 MHz : 50 W Usable sensitivity (SIN = 30dB) Full Bandwidth Power (at less than 1 THO) \lV 175 0) : 9.3dBf (0.8...
  • Page 50 KDC-X590 CORRECTION/CORRECCION Incorrect/lncorrecto English Page 39 Fran~ais Page 87 Espanol Pagina 135 I __ :0::0: ~_:.QJ:---,9J • • • • IllUMI • • • • Lj-T~~i~J-------------------------------------) Correct/Correcto IllUMI • To "EXT.AMP.CONT" terminal of the amplifier having the external amp control function. •...
  • Page 51 Media Manager INSTALLATION MANUAL MANUEL D1INSTALLATION INSTALLATIONSHANDBUCH INSTALLATIEHANDLEIDING MANUALE DI INSTALLAZIONE MANUAL DE INSTALACION Kenwood Corporation © 859-1850-00/00 (KETM)
  • Page 52 4) to install PhatNoise Media Manager. To enjoy sample tracks Insert the CD into Kenwood car audio 2. Select the button on Kenwood car audio that activates Voice Index to search by album, artist, genre, or playlist to select the desired track. English...
  • Page 53 Required Operating Environment To use Media Manager, the following software and hardware are required: Software Microsoft® Windows® 98SE, ME, 2000, or XP Hardware • Personal computer (main unit, display, and peripheral units) incorporating a 500 MHz or better Pentium® II processor (or the equivalent) on which the above OS can run normally •...
  • Page 54 Software Installation Install Media Manager following the procedure below. NOTE • The PC needs to be rebooted during installation. End all application programs before starting the installation procedure. Installing the Program Set the Media Manager installation disc in the CD-R/CD-RW drive. The installation program will start automatically.
  • Page 55 Click_._ Installation processing is continued. Click_~E The PC will be rebooted. NOTE • Adobe Reader is needed to read User Manual. English...
  • Page 56 At the first starting up Double-click PhatNoise Media Manager icon on the desktop. Media Manager starts up and [Please Register!] dialog appears. Enter to all fields, and click [Load Media From Folder] dialog appears. Click Cancel English...
  • Page 57 Language Selection You can change the display language for Media Manager. Select [Options...] from the [Tools] menu. The [Preference] dialog will appear. Select a desired language in the "Select Language" combo box. Clickmm. The display language and manual language for Media Manager will be changed to the selected one.
  • Page 58 Microsoft and Windows are either registered trademarks or trademarks Microsoft Corporation in the United States and/or other countries.
  • Page 59 KENWOOD...
  • Page 60 Desactivez Ie mode de demonstration. ATTENTION ([~II]) Appuyez sur la touche de commande pendant au moins 2 Before using this product for the first time secondes jusqu'a ce que Ie message "DEMO OFF"/ "DEMO Mode:OFF" Demonstration function is set to ON as the original setting for this product. s'affiche.
  • Page 61 -Attenzione: Questa scheda necessaria per acquistare un nuovo pannello frontale dopo un furto danni. Atencion: Esta tarjeta es necesaria para comprar el panel en el caso de que lehaya side robado se haya estropeado. Kenwood Corporation...
  • Page 62 Name of set Nom de I'appareil Modell Sales dete Date d'schat Verkaufsdatum Modello dell'apparecchio 1 Modelo Data d'acquisto 1 Fecha de venta Dealer stamp Cachet du vendeur Handlerstempel 1 Sello del vendedor KDC-XS90 1111I111111111111111111I111111 019048 167286 Signature of Dealer Signature du vendeur Unterschrift des Handlers 1 Firma del vendedor No.1 Serial...
  • Page 63 The following are not covered by the warranty: Any product which is not distributed in the U.S.A. by Kenwood orwhich is not purchased in the U.S.A. from an authorized Kenwood car stereo dealer or an automobile dealer, unless the product is purchased through the U.S.A Military Exchange Service.

This manual is also suitable for:

Kdc-x590Kdc-mp532u

Table of Contents