TYAN TIGER I7322DP Manual page 69

4.7 Initialize Drives
If an installed disk does not appear in the disk selection list for creating a new
array or if it appears grayed out, you may have to initialize it before you can use
it as part of an array. Drives attached to the controller must be initialized before
they can be used in an array.
===Adaptec SATA HostRAID Controller #0 Array Configuration
Main
Manage Array
Create Array
Add/Delete
Hotspare
Prepare drives for creating arrays.
Take caution in using this option; Initialization will erase all Array
information from the selected drives. Any away using any of these
drives as members will be affected.
1. Select Initialize Drives.
2. Use the <↑> and <↓> keys to highlight the disk you wish to Initialize and
press Insert.
3. Repeat step 2 so that both drives to be initialized are selected.
4. Press <Enter>
5. Read the warning message and ensure that you have selected the correct
disk drives to initialize. Type Y to continue.
Utility===
Warning
69
http://www.tyan.com