TYAN TIGER I7322DP Manual page 56

3.4.5 Console Redirection
Main
Advanced
Console Redirection
Com Port Address
Baud Rate
Console Type
Flow Control
Console connection:
Continue C. R. after POST:
F1 Help Select Item
↑↓
Esc Exit Select Menu
← →
Com Port Address
If enabled it will use a port on the motherboard.
Options: Disabled / On-board COM A / On-board COM B / NULL
Baud Rate
Enables the specified baud rate.
Options: 300 / 1200 / 2400 / 9600 / 19.2K / 38.4K / 57.6K / 115.2K
Console Type
Enable the specified console type.
Options: VT100/VT100, 8bit / PC-ANSI, 7bit / PC ANSI / VT100+ / VT-UTF8 / NULL
Flow Control
Enable Flow Control.
Options: NULL / XON/XOFF / CTS/RTS
Console Connection
Indicate whether the console is connected directly to the system or a modem is
used to connect.
Options: Direct / Via modem
Continue C.R. after POST
Enable Console Redirection after OS has loaded.
Options: Off / On
PhoenixBIOS Setup Utility
Security Power
[Disabled]
[19.2K]
[PC ANSI]
[CTS/RTS]
[Direct]
[Off]
-/+ Change Values
Enter Select
Sub-Menu
56
http://www.tyan.com
Boot Exit
Item Specific Help
Select Com Port on
BMC or motherboard.
F9 Setup Defaults
F10 Previous Values