Adaptec Raid Configuration Utility; Manage Array - TYAN TIGER I7322DP Manual

1. Attach either cable end to the SATA connector on the motherboard.
2. Attach the other cable end to the SATA hard disk.

4.3 Adaptec RAID Configuration Utility

The Serial ATA RAID sets must be configured in the RAID Configuration utility
for two HDD. This configuration can be done by the Adaptec
ROM. During the Power-On Self Test (POST), the following message will
appear for a few seconds: Press <Ctrl-A> to enter RAID Configuration Utility.
After this message appears, press the <Ctrl> and <A> keys simultaneously, the
following screen menu appears.
The 'Drive Model', 'Serial #', and 'Size' listed in your system
can differ from the following example.
Adaptec RAID Configuration Utility
Adaptec SATA HostRAID Controller #0
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (*=default)

4.4 Manage Array

Use the Manage Arrays option to view array properties and members, and
delete arrays. The following sections describe these operations in greater detail.
Note
Option
Array Configuration Utility
Disk Utilities
64
http://www.tyan.com
®
RAID Option