TYAN TIGER I7322DP Manual page 55

Interrupt:
Set the interrupt for parallel port.
Options: IRQ7 / IRQ5
Floppy Disk Controller
This defines how the floppy disk controller is detected and configured.
Options: Disabled / Enabled
3.4.4 DMA Event Logging
Main
Advanced
DMI Event Logging
Event log validity
Event log capacity
View DMI event log
Event Logging
ECC Event Logging
Mark DMI events as read
Clear all DMI event logs
F1 Help Select Item
↑↓
Esc Exit Select Menu
← →
View DMI event log
View the contents of the DMI event log.
Options: Disabled / Enabled
Event Logging
Select Enabled to allow logging of DMI events
Options: Disabled / Enabled
ECC Event Logging
Select Enabled to allow logging of ECC events
Options: Disabled / Enabled
Mark DMI events as read
Press <Enter> to mark DMI events as read.
Clear all DMI event logs
Setting this to 'Yes' will clear the DMI event log after rebooting.
Options: No / Yes
PhoenixBIOS Setup Utility
Security Power
Valid
Full
[Disabled]
[Enabled]
[Enabled]
[Enter]
[No]
-/+ Change Values
Enter Select
Sub-Menu
55
http://www.tyan.com
Boot Exit
Item Specific Help
View the contents of the
DMI event log.
F9 Setup Defaults
F10 Previous Values