TYAN TIGER I7322DP Manual page 48

3.4.1 Advanced Chipset Control
This section allows you to fine tune the chipset configuration.
Main
Advanced
Advanced Chipset Control
Integrated Device Control Sub-Menu
Integrated LAN 1 (BCM5721)
Integrated LAN 2 (BCM5705)
Integrated LAN 3 (i82551)
Onboard XGI Video
Spectrum Spread
Force Compliance Mode
PCI-E port A1 Device 3:
DRAM Data Integrity Mode
ECC Error Type
SERR signal condition
Memory Remap Function
F1 Help Select Item
↑↓
Esc Exit Select Menu
← →
Onboard XGI Video
Toggles the onboard XGI video graphics.
Options: Enabled / Disabled
Spectrum Spread
When enabled, this option modulates the frequency of the CPU clock rate (and
hence all clock driven mainboard components), so that any EMI interference
generated is not always at the same constant frequency, but instead is spread over
a small band of frequencies, therefore reducing problems with equipment that may
be particularly sensitive to certain fixed frequencies.
Options: Enabled / Disabled
Force Compliance Mode
Enable or Disable PCI-E Compliance mode by setting item to the desired value.
Options: Enabled / Disabled
PCI-E port A1 Device 3
The item control the PCI-E device which is plugged on the PCI-E slot to be disabled
or enabled.
Options: Disabled / Enabled / Auto
DRAM Data Integrity Mode
If you have ECC memory modules installed, select the correct ECC mode with this
setting.
Options: Disabled / 72-bit ECC / 144-bit ECC / Auto
PhoenixBIOS Setup Utility
Security Power
[Enabled]
[Disabled]
[Disabled]
[Auto]
[Auto]
[SMI]
[Single bit]
[Enabled]
-/+ Change Values
Enter Select
Sub-Menu
48
http://www.tyan.com
Boot Exit
Item Specific Help
These items determine
whether the integrated
PCI Devices will be
Enabled in PCI Config
space.
F9 Setup Defaults
F10 Previous Values