TYAN TIGER I7322DP Manual page 49

ECC Error Type
When an ECC error occurs, it generates an interrupt. Select the type of interrupt to
report: NMI (Non-Maskable); SMI (System Management); SCI (System Control).
Options: None / NMI / SMI / SCI
SERR signal condition
Select ECC error conditions that SERR# be asserted.
Options: None / Single bit / Multiple bit/ Both
Memory Remap Function
Remaps the memory used by the BIOS (A0000 to FFFF - 384 k) above the 1 Mb
limit. If enabled, you cannot shadow Video and System BIOS.
Options: Enabled / Disabled
3.4.1.1 Integrated Device Control Sub-Menu
Main
Advanced
Integrated Device Control Sub-Menu
USB Device 29, function 1:
USB Device 29, Function 0 & 1:
USB Device 29, Function 7:
F1 Help Select Item
↑↓
Esc Exit Select Menu
← →
USB Device 29, Function 1:
Enable or Disable this USB Device by setting item to the desired value.
Options: Enabled / Disabled
USB Device 29, Function 0 & 1:
Enable or Disable these 2 USB Functions by setting item to the desired value.
Options: Enabled / Disabled
USB Device 29, Function 7:
Control USB 2.0 functionality through this Setup Item.
Options: Enabled / Disabled
PhoenixBIOS Setup Utility
Security Power
[Enabled]
[Enabled]
[Enabled]
-/+ Change Values
Enter Select
Sub-Menu
49
http://www.tyan.com
Boot Exit
Item Specific Help
Enable or disable this
USB Device by setting
item to the desired
value.
F9 Setup Defaults
F10 Previous Values