TYAN TIGER I7322DP Manual page 41

Extended Memory
This displays/allows you to change the amount of extended memory present on the
system.
3.3.1 IDE Channel Master / Slave Setup
Computer detects IDE drive type from drive C to drive F.
Press Enter on any of the Master/Slave options to view advanced details of the
corresponding drive.
Advanced
Main
Type:
Multi-Sector Transfers:
LBA Mode Control:
32 Bit I/O:
Transfer Mode:
Ultra DMA Mode:
F1 Help Select Item
↑↓
Esc Exit Select Menu
← →
The system displays advanced details like the number of heads/cylinders/sectors
on the detected disk and the maximum storage capacity of the disk.
This option lets you set the following hard disk parameters:
Type
Selects the type of device connected to the system.
Options: Auto / CD/DVD / Not Installed / ARMD
Multi-Sector Transfers
This option allows you to specify the number of sectors per block for multiple sector
transfers.
Options: Disabled / 2 Sectors / 4 Sectors / 8 Sectors / 16 Sectors
LBA Mode Control
Enables or disables LBA Mode.
In LBA Mode, instead of referring to a cylinder, head and sector number, each
sector is instead assigned a unique "sector number". In essence, the sectors are
numbered 0, 1, 2, etc. up to (N-1), where N is the number of sectors on the disk.
PhoenixBIOS Setup Utility
Security Power
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
-/+ Change Values
Enter Select
Sub-Menu
41
http://www.tyan.com
Boot Exit
Item Specific Help
User = your enter
parameters of hard-disk
drive installed at this
connection.
Auto = autotypes hard-
disk drive installed here.
1-39 = you select pre-
determined type of
hard-disk drive installed
here.
CD-ROM = a CD-ROM
drive is installed here.
ATAPI Removable =
removable disk drive is
installed here.
F9 Setup Defaults
F10 Previous Values