TYAN THUNDER 100 Manual page 50

Chapter 3
Onboard Resource Settings
3) Rename C:\WINNT\INF\WAVE.INF
C:\WINNT\INF\WAVE.OLD
4) Go to D:\DRVLIB\PNPISA\X86 on your WinNT CDROM
5) Right Click on PNPISA.INF.. Select "Install". This will start the
Plug and play driver installation.
6) Restart the system when prompted. Login as Administrator.
a)After logging in, you will get a "New Hardware Found" dialog box:
"Creative ViBRA16X PnP (Audio)"
"Select which driver you want to install for your new hardware"
(Driver from disk provided by hardware manufacturer)
b) Insert the Tyan Computer CDROM into he CDROM drive.
Wait 5-10 seconds, then Click on OK.
7) The "Install from disk" dialog box appears.
a) Type in the drive letter of your CDROM drive (Ex. D:\), then
Click on "Browse".
b) Double Click "Audio"
c) Double Click "S1836"
d) Double Click "WINNT 40"
e) Click "Open" D:\Audio Driver\S1836\WinNT 40 will be
displayed.
f) Click "OK" .
8) The "Select Device" screen shows "Creative Sound Blaster 16 Plug
and Play"
a) Click "OK" files are copied
9) Then the "Sound Blaster 16 Configuration" screen shows the
resource allocation for the Sound Blaster feature. If there are
"conflicts" listed in the "Conflicting device list",adjust the "Resource
settings". If no conflicts, Click "OK".
10) An "Insert Disk" Dialog Box appears. Follow the instructions then
Click "OK"
11) A "New Hardware Found" Message will appear. "Microsoft
Joystick Port Enabler"
a) Then a "Files Needed" Dialog Box will appear. In the "Copy
files from:" box, type in:
(D: drive file path refers to Windows NT 4.0 CD)
Then Click "OK"
b) The "Joystick Port Configuration" Dialog Box appears. If no
conflicts, Click "OK"
12) You will then be asked to restart your computer. Select "Yes".
System will reboot and sound will play after logging in.
D:\DRVLIB\AUDIO\SBPNP\I386
50
http://www.tyan.com