TYAN THUNDER 100 Manual page 39

your hard disk drive.
1.
2.
3. Double-click the Network icon in the Control Panel
3.
procedure 4. Click the Adapters tab in the window that appears.
5. Click Add. A list of adapters appears.
6. Select the "Have Disk" icon and point it to the directory that you created on
your hard drive in step 2.
7. You will see "Intel Ether Express PRO PCI Adapter". Click OK.
8. Follow the NT prompts to complete the installation. (This will require the NT
4.0 CD)
9. Click OK in the main PROSet window to return to Windows NT.
10. The Intel adapter now appears as the "Intel 82558-based 10/100 Ethernet
Adapter" on the list in the Network window. Click Close to finish.
11. Restart Windows NT when prompted.
To install multiple adapters, repeat this procedure for each new adapter. See
"Installing Multiple Adapters" for specific information. To run the PROSet
software at any time, double-click the Intel PROSet icon in the Control Panel or
click the Adapter Properties button.
Install network drivers - Windows NT Version 3.5x only.
After putting the adapter in the computer and starting Windows NT, you need
to install the Intel drivers and test the adapter.
1. Double-click the Network icon in the Control Panel.
2. Click Add Adapter.
1.
2.
3. When the list of adapters appears, scroll to the end of the list and select
3.
<Other> Requires disk from manufacturer.
procedure
4. Insert the Intel Configuration and Drivers disk/CD in the drive and click OK.
Drivers and the Intel PROSet utility are installed and PROSet starts. PROSet is
an enhanced utility that you can use to easily configure and test your adapter
in Windows NT. PROSet also displays the computer resources that were
assigned to each PRO adapter installed. The PROSet main window is shown
on the preceding page.
5. Click OK in the PROSet main window to return to Windows NT.
6. Click OK in the Network Settings dialog box and remove the installation
disk. When prompted, restart Windows NT.
To install multiple adapters, repeat this procedure for each new adapter. See
"Installing Multiple Adapters" for specific information. To run the PROSet
software at any time, double-click the Intel PROSet icon in the Control Panel.
S1836 Thunder 100
39