TYAN THUNDER 100 Manual page 41

5. Follow prompts for any Windows 95 installation disks and restart when
prompted. (If you installed from CD-ROM, the installation files are typically
located at D:\Win95, where D is your CD-ROM drive.)
After restarting Windows 95, you should be able to connect to your network
by double-clicking the Network Neighborhood.
Install PROSet Software
PROSet is an enhanced Intel utility that you can use to easily configure and
test your adapter in Windows 95. PROSet also displays the computer re-
sources that were assigned to each PRO adapter installed. To install PROSet:
1. Insert the Intel Configuration and Drivers CD.
1.
2.
2. From My Computer or the Windows Explorer, double-click the CD icon.
3.
3. Click the "Proset" icon or filename and click the right mouse button. From
procedure
the menu that appears, click Install.
4. The PROSet files are copied to your hard disk.
5. Start PROSet by double-clicking on the Intel PROSet icon in the Control
Panel.
6. The PROSet software examines your computer and displays an Intel PROSet
window.
7. Click OK to exit PROSet and return to Windows 95.
Manually Adding an Adapter
If the New Hardware Found dialog box does not appear at startup and you
cannot connect to the network, check the Device Manager list to see if the
new adapter is present. If it is not, use the following procedure.
1. From the Control Panel, double click the System icon.
1.
2.
2. Click the Device Manager tab in the window that appears.
3.
3. Double-click Other Devices (question mark icon) in the list area.
procedure
4. Double-click PCI Ethernet Controller.
5. Click the Driver tab, then click Change Driver.
6. Select Network Adapters and click OK.
7. Click Have Disk from the window that appears. Insert the Intel Configuration
and Drivers Disk and click OK.
8. Follow any prompts for Windows 95 installation disks and restart when
prompted.
If you can't connect to a server or if Windows 95 reports an error after you
S1836 Thunder 100
41