Disk Drive List - HP 2000fc Reference Manual

Details in the lower part of the panel vary depending on the selected port's status.
Topology – Port connection type.
■
Speed – Actual link speed in Gbit per second per PHY lane.
■
Number of Active Lanes - The number of active PHY lanes and the number of
■
lanes in the port.
Port WWN – Port World Wide Name.
■
Health – Port status:
■
Healthy – All PHY lanes are active in the port.
■
Degraded – At least one PHY lane is inactive in the port.
■
SAS Chip Revision – Hardware revision level of the SAS expander processor in
■
the controller.
SAS Libraries Revision – Firmware revision level of the SAS libraries.
■

Disk Drive List

To view information about all disk drives in the storage system:
● Select Monitor > Status > Advanced Settings > Disk Drive List.
This page shows the total number of drives that:
Are installed
■
Are available (have Available status)
■
Contain leftover metadata from a previous virtual disk
■
Are down (failed)
■
It also shows the following information about each drive:
Status – Up if operational or Down if failed.
■
Size – Drive size in Gbyte.
■
Speed – Data transfer rate in Gbit per second.
■
Manufacturer – Drive manufacturer.
■
Model – Drive model number.
■
Revision – Drive firmware revision.
■
Node WWN – Drive node World Wide Name.
■
Serial Number – Drive serial number.
■
Encl.Slot – Enclosure number and slot number containing the drive.
■
Chapter 5 Monitoring System Status 155