Iscsi; Sas - HP 2000fc Reference Manual

iSCSI

Each controller has a unique, permanent hardware address. Each controller host port
has a unique, user-defined IP address.
The following table shows example hardware addresses and port IP addresses.
Controller Hardware Address
A 00C0FF0A8A51
B 00C0FF0A8A52

SAS

Both controllers have the same unique, permanent node WWN. Each controller host
port has a unique port WWN that is based on the node WWN. The WWN format is:
5
<OUI><serial-number><port-ID>
– The manufacturer's unique identifier, 00C0FF.
OUI
■
serial-number
■
midplane serial number.
– 0 for controller A port 0; 1 for A1; 2 for B0; 3 for B1.
port-ID
■
The following table shows example node WWNs and port WWNs. Notice that the
node WWNs are the same and the port WWNs differ in the fourteenth digit.
Controller Node WWN
A 500C0FF0A408A000
B 500C0FF0A408A000
iSCSI Port IP Address
0: 10.11.10.4
1: 10.10.10.5
0: 10.11.10.2
1: 10.10.10.3
00
– A serial number derived from the last six hex digits of the
SAS Port WWN
0: 500C0FF0A408A000
1: 500C0FF0A408A100
0: 500C0FF0A408A200
1: 500C0FF0A408A300
Appendix C Host Access to Storage 257