Selecting Or Clearing All Events For Notification; Using Event Logs - HP 2000fc Reference Manual

Selecting or Clearing All Events for Notification

You can select or clear all individual events for any or all of the notification types.
Selecting all individual events is useful if you want to select many events but not
all; set all the events on this page, then go to pages for individual events and clear
events you don't want.
Clearing all individual events is useful if you want to clear all the individual event
settings so you can set up a new custom configuration.
To select all events:
1. In the Set All Individual Events panel, select the checkbox for each notification type
to use.
2. Click Set All Individual Events.
To clear all events:
1. In the Clear All Individual Events panel, select the checkbox for each notification
type you don't want to use.
2. Click Clear All Individual Events.

Using Event Logs

Event logs capture reported events from components throughout the storage system.
Each event consists of an event code, the date and time the event occurred, which
controller reported the event, and a description of what occurred.
This section includes the following topics:
"Event Severities" on page 219
■
"Viewing the Event Log" on page 219
■
"Viewing an Event Log Saved From SMU" on page 221
■
"Reviewing Event Logs" on page 222
■
"Configuring the Debug Log" on page 224
■
"Saving Log Information to a File" on page 223
■
218 HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008