HP 2000fc Reference Manual page 233

Table A-1 FA MIB 2.2 Objects, Descriptions, and Values (Continued)
Object
connUnitRevsTable
connUnitRevsUnitId
connUnitRevsIndex
connUnitRevsRevId
connUnitRevsDescription
connUnitSensorTable
connUnitSensorUnitId
connUnitSensorIndex
connUnitSensorName
connUnitSensorStatus
connUnitSensorInfo
Description
Includes the following objects as
specified by the FA MIB2.2 Spec
connUnitId of the connectivity
unit that contains this revision
table
Unique value for each
connUnitRevsEntry between
1 and connUnitNumRevs
Vendor-specific string identifying
a revision of a component of the
connUnit
Description of a component to
which the revision corresponds
Includes the following objects as
specified by the FA MIB2.2 Spec
connUnitId of the connectivity
unit that contains this sensor table
Unique value for each
connUnitSensorEntry
between 1 and
connUnitNumSensors
Textual identification of the sensor
intended primarily for operator
use
Status indicated by the sensor
Not supported
Value
Same as connUnitId
See "External Details for
connUnitRevsTable" on
page 238
String specifying the code
version. Reports "Not
Installed or Offline" if
module information is not
available.
See "External Details for
connUnitRevsTable" on
page 238
Same as connUnitId
See "External Details for
connUnitSensorTable" on
page 239
See "External Details for
connUnitSensorTable" on
page 239
ok[3], warning[4], or
failed[5] as appropriate for
FRUs that are present, or
other[2] if FRU is not
present.
Empty string
Appendix A SNMP Configuration 233