Table of Contents
Advertisement
8
Connecting Video
Introduction
This chapter shows how to connect video outputs from the Smart Media Console
(SMC) to a TV, monitor or A/V receiver's video inputs�
Note: Connect video outputs to the SMC before turning the unit on, so the
video connection can be detected by the software during startup and
display settings can be adjusted accordingly� If you change the display
or video output connections or have problems with video display quality,
you may need to go into the NVIDIA display setup to adjust the display
settings (refer to the Troubleshooting chapter on displays at the end of this
manual)�
Smart Media Console Installation Manual
45
Advertisement
Table of Contents
